Stainless Steel Heat Exchanger Coil

 

● tube diameters in 3/8" (9.53mm) and 7mm and others upon request.3/8" tube is suitable for high capacities and high flow rates.
● 7mm tube is suitable for low capacities and low flow rates of the refrigerants. Which enables to get higher efficiency in a reduced volume.

We are a professional heat exchanger, condenser, evaporator and heat pump manufacturer in China
Our products have been exported to Europe,USA, Japan and Middle east etc.

Main Features:
1. material :stainless steel , copper
2. copper foil: hydrophilic or bare
3. fin type: louver fin or flat fin or corrugated fin
4. stainless steel tube: 9.52mm.
5. pitch of fins can be adjusted between 1.8—5.8mm.
6. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
8. voltage: 220V/1/50HZ and 380V/3/50HZ or 120V/50HZ.
9. different alternative condensing fans available: shaded pole or outer rotor fan motor.
10.did gas examination under 3.0Mpa air pressure to ensure the tightness.
11.condenser type:single fan, double fan, triple fan and fourfold fan
12.widely used in refrigeration industry, water cooling system.
13. we can supply products as per customized samples or drawing.
14.1/4 hp,1/3hp,1/2hp.....
15. It is widely used in Food machinery,medical equipment.

Producing procedure:
tube bending, punching fin, expanding, digressing, drying, welding, leakage test, bending, inspection, packing.
we can supply items according to customers'drawings or samples.