Freezer Unit Evaporator

Freezer Unit Evaporator:
1. Freezer Unit Evaporators are designed and manufactured for cooling table.
2. We can also manufacture it mainly used in low-moderate cooling occasions, such as hospitals, clean rooms, ships, chemical air conditioner, food, paper industry, tobacco and other factories or laboratories.
 
Specification:
1. Tube O.D.: 7mm. 
2. Materials: copper tube hydrophilic aluminum fin;
3. This product welded depending on the material and application.
4. Heat exchanger outline size and shape: can be manufactured according to clients’ requirements.
 
Feature: 
1. Tube material: copper , aluminum, stainless steel, ect.
2. Fin material: copper, hydrophilic aluminum, bare aluminum, stainless steel, ect.
3. Fin type: louver fin or flat fin or corrugated fin
4. copper pipe: diameter 7mm or 8mm or 9.52mm, grooved or smooth tube
5. pitch of fins can be adjusted between 1.8—5.8mm.
6. pitch of holes and pitch of rows : 25*21.65MM and 12.7*19.05MM
7. suitable for R134A, R22, R404A, R407C refrigerant and so on 
8. voltage: 220V/1/50HZ and 380V/3/50HZ or other type.
9. different alternative condensing fans available: shaded pole or outer rotor fan motor.
10.did gas examination under 3.0Mpa air pressure to ensure the tightness.
11.widely used in refrigeration industry, cold room and other cooling system.
12. we can supply products as per customized samples or drawing.

Procedure:

Fin heat exchanger application
1: Used in AHU(air handlign unit)	2: Used in air source heat pump	3: Used in FCU(fan coil unit)	4: Used in ice maker
5: Used in household split air conditioner	6: Used in cabinet	7: Used in air cooled chiller.	8: Used in dehumidifier.
9: Used in beauty laser equipment.	10: Used in bus air conditioner.	11: Used in air cooled condensing unit.	12: Used in island counter or deep freezer